상품요약정보 | 파워서플라이 별매 |
---|---|
자체상품코드 | 88888866 |
제조사 | GT POWER |
원산지 | 중국 |
적립금 | 650 |
판매가 | 65,000원 |
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
G.T. Power A607 Balance Charger (80W / 7-Amp / 6 Cells) - 파워서플라이 별매
The G.T. Power A607 charger is a simple yet powerful multifunctional charger with built in LiPo balancing (JST-XH) for up to 6S.
It is packed with features that exceeds many higher cost units.
Primarily designed for Lithium Polymer (LiPo, Li-Poly) batteries, it can also charge Li-Ion, Li-Fe (A123M1), Ni-Cd, Ni-MH, and Pb (lead acid) batteries.
The GT Power A607 is more powerful than the entry level balancing charger, and can handle up to 6-cells and 7A, at 80W of power. The GT Power A607 charger will handle LiPO/LiFE battery packs up to 6S and NiMH/NiCD up to 15S and show individual cell voltage during charge, which real time charge info throughout the charge cycle.
Power supply not included.
Specifications:
Key Features:
Optimized operating software
When charging or discharging, It has an `AUTO` function that sets the feeding current automatically. Especially for Lithium batteries, it can prevent the over-charging can lead to an explosion by users fault. Every program in the unit is controlled with mutual links and communication for every possible error so it introduces a maximum safety. These can be set at users option.
High-power and high-performance circuit
It employs the circuit that has maximum output power of 80W. As a result it can charge or discharge up to 15 cells of NiCd/NiMH and 6 series of Lithium batteries with maximum current of 7.0A. Furthermore the cooling system is so efficient that can hold such a power without any trouble of running the CUP or the operating program.
Individual voltage balancer for Lithium batteries inside
Ithas an individual-cell-voltage balancer inside. This does not requireany extra balancer separately when charging Lithium batteries(Lilo/LiPO/LiFe) for cell voltage balancing.
Balance individual cells on discharge
Italso can monitor and balance individual cells of the Lithium batterypack during the discharge process. If the voltage of any one cell variesabnormally, the process will be stopped with the error message.
Accept various types of Lithium battery
Itcan accept three types of Lithium batteries - Lilo, LiPo and LiFe. Theyhave different characteristics by their chemistry. You can select anyone of them that you are going to process before the job. For theirspecifications, refer `Warnings and safety notes` section.
Lithium battery `Fast` and `Storage` mode
Youcan charge Lithium battery for special purposes. `Fast` charge reducesthe charging time of Lithium battery and `storage` mode controls thefinal voltage of the battery to be suit for long time storage.
Maximum safety
Delta-peaksensitivity: The automatic charge termination program works on theprinciple of the Delta-peak voltage detection. (NiCd/NiMH)
Auto-charge current limit: Whencharging NiCd or NiMH at `AUTO` current mode, you can set the upperlimit of change current to avoid from high current charging. This isvery useful when charging the low impedance and small capacity NiMHbattery in `AUTO` mode.
Capacity limit: The changing capacityalways calculated by multiple of the charging current and time. If thecharging capacity exceeds the limit the process will be terminatedautomatically when you set the maximum value.
Processing time limit: you can also restrain the maximum process time to prevent form any possible defect.
Input power monitor: To protect thecar battery using as input power from being damaged the voltage of italways monitored. If it drops below the lower limit the process will beended automatically.
Automatic cooling fan: The electriccooling fan comes into action automatically only when the internaltemperature of the unit is raised.
Data store / load
Forusers convenience it can store maximum 5 data of different batteries. You can establish the data contains program setting of the battery tocharge or discharge continually. These data can be called out at anytime you need and the process can be executed without program setting.
Cyclic charging / discharging
Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.
충전시 주의사항
배터리 타입에 따른 정확한 충전모드로 충전하세요.
충전시 바람이 잘통하는 서늘한곳에서 충전해주세요
(5도~26도 사이)
집이나 사무실 자동차등 밀폐된 공간에서 충전하지마세요.
배터리 화재시 2차 화재가 발생하지 않는 안전한 장소에서 충전해주세요.
(화재로 인한 2차 피해는 보상하지 않습니다.예-연기나 2차 화재)
리튬 배터리 충전시 1C이하로 충전하시고 발란싱 모드로 충전하세요.
배가 부르거나 이상이 있는 배터리는 충전하지마세요.
충전이나 방전시 열이 발생될수 있습니다.(열 발생시 만지지 마세요.)
충전중 자리를 꼭 지켜주시고 충전에 문제가 없는지 꼭 확인 후 충전해주세요.
충전시 화재가 발생하지 않는 전용 충전백이나 철 보관함등에 넣어서 충전해주세요.
화기 근처에서 충전하지 마세요.
충전중 문제가 발생시 충전을 중지하시고 고객센타로 문의해주세요.
충전시 주의사항
1. 리튬 폴리머 배터리 충전시 배터리 용량의 1C범위 이내에서 열이 발생하지 않도록 충전을 해야합니다.
2. 리튬 폴리머 전용 충전기를 사용하여 과충전 하지 않아야 됩니다.
3. 셀당 전압을 4.25V 이상 과충전 할경우 파손되니 반드시 전용 충전기로 발란스 모드로 꼭!!충전을 하셔야 됩니다.
4. 방전기로 방전을 시키면 안됩니다(셀당 전압이 2.65V 이하로 방전되면 회복불능)알람기 사용권장!!
5. 비행기 모터등 기타기기 사용시 배터리의 용량의 방전범위 내에서
배터리가 무리가 가지않게 사용을 해야합니다(가이드란의 배터리 방전 특성참조)
6. 단자간 단락(쇼트) 및 합선을 시키지 안됩니다.
7. 임의로 분해를 절대로 하시면 안됩니다.
8. 사용을 하지 않을경우 전원을 꺼도 배터리를 반드시 분리하셔야 됩니다.
9. 리튬 배터리는 사용을 안할시 스토리지 모드로 충전을 하셔야 됩니다.
10. 장기간 보관시 자연방전 될수 있습니다.
11. 리튬 배터리의 형태가 변형이 오거나 발열이 발생시 빠른 폐기를 하셔야 됩니다.
12. 리튬 배터리를 충전이나 보관시 화재 진행이 어려운 철재 박스에서 충전이나 보관을 하셔야 됩니다.
13. 배터리의 특성상 잘못된 사용 방법이나 보관을 하실경우 폭발이나 화재가 발생될수
있으며 당사는 책임을 지지않으니 이점 유의 하셔서 구입과 사용 유의를 하셔야 됩니다.