상품요약정보 | 급속충전기 + 5A 파워서플라이 셋트상품 |
---|---|
자체상품코드 | B6COMBO |
제조사 | IMAX |
원산지 | 중국 |
적립금 | 390 |
판매가 | 39,000원 |
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
IMAX B6 Charger & Discharger + 5A 파워서플라이 셋트
Specifications:
Operating voltage range: DC 11-18 Volts
Circuit power: Max. charge power 50W
Max. discharge power 5W
Charge current range: 0.1-5.0A
Discharge current range: 0.1-1.0A
Current drain for balancing Li-po: 300mA/cell
NiCd/NiMH battery cell count: 1-15cells
Li-ion/Fe/Polymer cell count: 1-6cells
Pb battery voltage: 2-20V
Net weight: 277g
Dimension: 133x87x33mm
This iMax B6 is a rapid charger with a high performance microprocessor and specialized operating
SoftwareOptimized operating software
iMax B6 features an AUTO function that controls the charge rate during charging and discharging. For Lithium batteries, this can prevent overcharging which may lead to an explosion due to the users setting the charge rate improperly. It will disconnect the circuit automatically and initiate an alarm if there is any malfunction. All the operating modes of this charger are controlled through two way communication, between the charger and the battery to achieve maximum safety. All the settings can be configured by the user.
Internal independent lithium battery balancer
iMax B6 employs an individual-cell-voltage balancer. It is not necessary to connect an external balancer for balance charging.
Balancing individual cells battery discharging
During the process of discharging, the eXtreme 605 can monitor and balance each cell of the battery individually. An error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal.
Adaptable to various types of lithium battery
iMax B6 is adaptable to various types of Lithium batteries, such as Li-ion, LiPo and the new LiFe series of batteries.
"Fast" and "storage" mode of lithium battery
There are various methods of charging Lithium batteries. "Fast" charge reduces the charging time whereas "store charge" can control the final voltage of your battery. This method is best for long term storage and protects the useful life of the battery.
Maximum safety
Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the batterys voltage exceeds the threshold, the process will be terminated automatically.
Automatic charging current limit:
You can set the upper limit of the charge current when charging your NiCd or NiMH batteries. This is useful for NiMH batteries of low impedance and capacity in the AUTO charging mode.
Temperature threshold:
The batteries internal chemical reaction can cause the temperature of the battery to rise during charging. If the temperature limit is reached (set by the user), the charging process will be terminated. This function is available by connecting an optional temperature probe, which is not included in with the charger.
Processing time limit:
The user can set the maximum charging time. If the charging time exceeds the limit, the process will be terminated automatically when you set the maximum time for the charging mode.
Data store/load
The "" can store data from ten different batteries. The user can set the charging / discharging parameters for a particular battery type and "call up" these settings to charge a battery without additional programming needed.
Cyclic charging/discharging
Batteries can be set to charge/ discharge for 5 cycles if needed.
충전시 주의사항
배터리 타입에 따른 정확한 충전모드로 충전하세요.
충전시 바람이 잘통하는 서늘한곳에서 충전해주세요
(5도~26도 사이)
집이나 사무실 자동차등 밀폐된 공간에서 충전하지마세요.
배터리 화재시 2차 화재가 발생하지 않는 안전한 장소에서 충전해주세요.
(화재로 인한 2차 피해는 보상하지 않습니다.예-연기나 2차 화재)
리튬 배터리 충전시 1C이하로 충전하시고 발란싱 모드로 충전하세요.
배가 부르거나 이상이 있는 배터리는 충전하지마세요.
충전이나 방전시 열이 발생될수 있습니다.(열 발생시 만지지 마세요.)
충전중 자리를 꼭 지켜주시고 충전에 문제가 없는지 꼭 확인 후 충전해주세요.
충전시 화재가 발생하지 않는 전용 충전백이나 철 보관함등에 넣어서 충전해주세요.
화기 근처에서 충전하지 마세요.
충전중 문제가 발생시 충전을 중지하시고 고객센타로 문의해주세요.
충전시 주의사항
1. 리튬 폴리머 배터리 충전시 배터리 용량의 1C범위 이내에서 열이 발생하지 않도록 충전을 해야합니다.
2. 리튬 폴리머 전용 충전기를 사용하여 과충전 하지 않아야 됩니다.
3. 셀당 전압을 4.25V 이상 과충전 할경우 파손되니 반드시 전용 충전기로 발란스 모드로 꼭!!충전을 하셔야 됩니다.
4. 방전기로 방전을 시키면 안됩니다(셀당 전압이 2.65V 이하로 방전되면 회복불능)알람기 사용권장!!
5. 비행기 모터등 기타기기 사용시 배터리의 용량의 방전범위 내에서
배터리가 무리가 가지않게 사용을 해야합니다(가이드란의 배터리 방전 특성참조)
6. 단자간 단락(쇼트) 및 합선을 시키지 안됩니다.
7. 임의로 분해를 절대로 하시면 안됩니다.
8. 사용을 하지 않을경우 전원을 꺼도 배터리를 반드시 분리하셔야 됩니다.
9. 리튬 배터리는 사용을 안할시 스토리지 모드로 충전을 하셔야 됩니다.
10. 장기간 보관시 자연방전 될수 있습니다.
11. 리튬 배터리의 형태가 변형이 오거나 발열이 발생시 빠른 폐기를 하셔야 됩니다.
12. 리튬 배터리를 충전이나 보관시 화재 진행이 어려운 철재 박스에서 충전이나 보관을 하셔야 됩니다.
13. 배터리의 특성상 잘못된 사용 방법이나 보관을 하실경우 폭발이나 화재가 발생될수
있으며 당사는 책임을 지지않으니 이점 유의 하셔서 구입과 사용 유의를 하셔야 됩니다.